Please use this identifier to cite or link to this item:
Type: Artigo de periódico
Title: Multilayer Analysis Of Anisotropie Heat Flux In Vertical Cavity-surface Emitting Lasers With Quarter-wave Semiconducting Mirrors
Author: Leal A.A.
Osiriski M.
Conforti E.
Abstract: Monolithic arrays of vertical cavity-surface emitting lasers (VCSEL's) have the potential to be used in microwave systems based on opto-electronic technologies. However, the temperature has a strong influence over several characteristics of VCSEL's. Self heating may restrain the gain inside the device cavity and it is responsible for an increase in the laser threshold current as well as a decrease of its output power. In this paper, the thermal behavior of VCSEL's was evaluated by means of a procedure that takes into account the multilayer aspects of the heat-flux propagation. The method has the advantage of dealing with the heat propagation inside each layer of the periodic structures of the device. Thus, the different characteristics and influence of the materials employed in the chip manufacturing can be considered and the device temperature profile can be predicted. From the method assumptions and simulations, the thermal resistances of typical devices were calculated. The results were shown to be in good agreement with experimental values reported in the literature. © 1998 IEEE.
Citation: Ieee Transactions On Microwave Theory And Techniques. , v. 46, n. 3, p. 208 - 214, 1998.
Rights: fechado
Date Issue: 1998
Appears in Collections:Unicamp - Artigos e Outros Documentos

Files in This Item:
File Description SizeFormat 
2-s2.0-0032026857.pdf201.35 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.