Please use this identifier to cite or link to this item:
|Type:||Artigo de periódico|
|Title:||Reduction of water consumption in an integrated first- and second-generation ethanol plant|
|Abstract:||The aim of this study was to estimate the increase in industrial water consumption and withdrawal in a conventional sugarcane ethanol mill due to the introduction of second-generation ethanol production by a bagasse hydrolysis process, and to identify opportunities of water reuse, in order to minimize water withdrawal. Simulations in ASPEN PLUS software were performed for mass and energy balances. Three cases were evaluated: a conventional ethanol production plant (Case I), and two second-generation plants incorporating bagasse hydrolysis differing only in their glucose concentration processes, namely by evaporation (Case II), and by membrane separation (Case III). Results show that external withdrawals of 738 L/t of cane for Case 1,955 L/t of cane for Case II and 853 L/t of cane for Case III are required to cover the water deficit of the plant. These values are lower than the mandated limit of 1000 L/t of cane for the sugar cane industry in the State of Sao Paulo. Moreover, for Cases II and III, which need large additional amounts of water for the hydrolysis stage, water usages of 10.77 and 9.38 L of water per litre of ethanol produced were achieved, approaching the figure of 9.34 L water per litre of ethanol produced by the conventional plants (Case I). This highlights the high potential for reduction practices based on the concept of energy and water integration. (C) 2013 International Energy Initiative. Published by Elsevier Inc. All rights reserved.|
|Editor:||Elsevier Science Bv|
|Citation:||Energy For Sustainable Development. Elsevier Science Bv, v. 17, n. 5, n. 531, n. 535, 2013.|
|Appears in Collections:||Unicamp - Artigos e Outros Documentos|
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.